The PT300DW™ scale is designed to maximize legal payloads with concern for violations and reduction of maintenance due to overload stress on equipment. Weighing a mere 49 lb/22 kg, this sturdy, all aluminum, fully electronic, self-contained wheel load scale is capable of weighing loads up to 20,000 lbs and more, with an accuracy of ±1%. The scale is fully battery operated and only requires infrequent recharging that can be accomplished by any 12, 110, or 220 volt power source. A charger adaptor is provided. The display area can be lighted for night use by merely touching the "LAMP" switch. It is possible to sequentially couple any number of PT300DW™ scales in series, for the purpose of obtaining the total weight of a vehicle. By activating the "TOTAL" switch, the total weight of all the preceeding scales will be displayed. The scales are linked at the I/O terminal jack with an optional cable. The I/O terminal will also transmit required data to a printer or a display, such as IntercompÕs S400HI ultra bright digital display. Also available are optional carrying cases that exceed government specifications. We invite your most exacting questions on capabilities of the PT300DW™ Wheel Load Scale System. Features:- Ideal for cars, trucks, off road vehicles and other custom applications
- Weigh only 49 lb, sturdy all aluminum, fully electronic design
- Battery Operated with 110 or 220 volt battery charger
- Capacities up to 40,000 lb/18,000 kg with an accuracy of ±1%
- Easily interconnected for axle weights or output to printer
General Information:- Data Interface: 20mA current loop
- Batteries: Operates on 6 1.2 volt ni-cads (standard), or alkalines
- Battery duration between charges: Approximately 8 hours of continuous use before the scale shuts itself off.
- Charging Voltage: 11.5 volts - 14.5 volts DC. Protection is provided for accidental reversal of the charging connections.
- Charging Current: Starts at 300mA and drops down to 50mA after 8 hours
- Charging Time:Â 8 hours if the batteries are discharged to the point of turning off the scale
- Scale Weight: 49lb/22 kg
- Accuracy: ±1%
Options:- Notebook Computer with axle weight software.
- Ramps
- Interconnect cables for totalizing and printing weights.
- Weigh pads (less indicator) for tying into remote indicator.
- 20 mA current loop output.
- 220 volt 50Hz battery charger.
- 2, 4, or 6 weigh pad carrying cases.
- Dummy weigh pads for leveling
- Printers for printouts of wheel, axle, axle group, gross weight, time and date, etc.
- PT Axle Weigher Indicator
Specifications:- Humidity: 10 to 95% Non-Condensing
- Temperature: Operating -28°C to 65°C | -20°F to 150°F/ Storage -40°C to 75°C | -40°C to 170°F
- EMI/RFI: Meets Mil Spec 461
- Overall Size: 3x26x22 inches / 76x660x559mm
- Platform: 22x14 inches / 559x356mm
- Weight: 49lb / 22.25kg
- Case: Heat treated Aluminum
- Voltage: Self-contained nickel cadmium batteries (standard) or alkalines. Integral recharger to chnage or operate from a 12, 110, or 220 volt power source.
|
