The PT300™ scale is designed to maximize legal payloads with concern for violations and reduction of maintenance due to overload stress on equipment. Weighing a mere 37 lb, this sturdy, all aluminum, fully electronic, self-contained wheel load scale is capable of weighing loads up to 20,000 lb and more, with an accuracy of ±1%. Incredibly, the PT300™ scale will accurately weigh to ±2% as a wheel rolls over the scale by simply activating the "HOLD" switch. The scale is fully battery operated and only requires infrequent recharging, which can be accomplished by any 12, 110 or 220 volt power source. A charger adaptor is provided. The display area can be lighted for night use by merely touching the "LAMP" switch. It is possible to sequentially couple any number of PT300™ scales in series, for the purpose of obtaining the total weight of all the preceeding scales will be displayed. The scales are linked at the I/O terminal jack with an optional cable. The I/O terminal will also transmit required data to a printer or a display, such as Intercomps S400 ultra bright digital display. Also available are optional carrying cases that exceed government specifications. Features:- Ideal for wheel, axle, axle group or total vehicle weight
- Weigh only 37lb, sturdy all aluminum, fully electronic design
- Capacity of 20,000lb/10,000kg with an accuracy of ±1%
- Battery operated with 120 or 220 volt battery charger
- Easily interconnected for axle weights or output to printer
General Information:- Data Interface: 20mA current loop
- Batteries: Operates on 6 1.2 volt ni-cads (standard), or alkalines
- Battery duration between charges: Approximately 8 hours of continuous use before the scale shuts itself off.
- Charging Voltage: 11.5 volts - 14.5 volts DC. Protection is provided for accidental reversal of the charging connections.
- Charging Current: Starts at 300mA and drops down to 50mA after 8 hours
- Charging Time:Â 8 hours if the batteries are discharged to the point of turning off the scale
- Scale Weight: 37lb/16.8 kg
- Accuracy: ±1% (±2% rollover)
Options:- Ramps
- Interconnect cables for totalizing and printing weights
- Weigh pads (less indicator) for tying into remote indicator
- 20mA current loop output
- 220 volt 50Hz battery charger
- 2, 4, or 6 weigh pad carrying cases
- Dummy weigh pads for leveling
- Printers for printouts of wheel axle, axle group, gross weight, time and date, etc.
Specifications:- Humidity: 10 to 95% Non-Condensing
- Temperature: Operating -28°C to 65°C | -20°F to 150°F/ Storage -40°C to 75°C | -40°C to 170°F
- EMI/RFI: Meets Mil Spec 461
- Overall Size: 3x16x20 inches / 76x406x508mm
- Platform: 12x12 inches / 305x305mm
- Weight: 37lb / 16.8kg
- Case: Heat treated Aluminum
- Voltage: Self-contained nickel cadmium batteries (standard) or alkalines. Integral recharger to chnage or operate from a 12, 110, or 220 volt power source.
|
