| The 200ES is a general purpose, "no frills" digital indicator housed in a stainless steel NEMA 4x enclosure. It comes with a large(.6") green LED screen for easy readout of up to 50,000 display divisions, and supplies enough current for up to four 350-ohm load cells. All setup parameters may be entered via the front panel keys. The 200ES uses full duplex RS-232 serial format for communication with many types of attached support equipment. The unit can transmit data on demand, or continuously in a popular data protocol to match a wide variety of printers, remote displays, or personal computers. Applications - Mechanical Conversion Kit
- Floor / Deck Scale Indicator
- Manifest Systems
Standard Features - High Quality / Low Cost
- NTEP Approved for 5,000 divisions
- Full Duplex RS-232 Serial Port
- Easy to Read LED Display
- Displays up to 50,000 graduations
- Drives up to four 350-ohm Load Cells
- Full Front Panel Configuration
- Stainless Steel Swivel Stand
- Operates on AC Adapter or Car Battery
Specifications Load Cell Excitation:
+10 VDC Load Cell Current:
Drives up to four 350-ohm load cells Analog Signal Input Range:
0.2 mV/V min to 3.0 mV/V max Analog Sensitivity:
0.4 micro volt/grad, minimum
1.0 micro volt/grad recommended minimum for Legal-for-trade A/D Conversion Rate:
Up to 25 meas/sec A/D Resolution:
Up to 260,000 internal counts Display:
0.6", 5 1/2 Digit LED Display Resolution:
Up to 50,000 external grads, selectable Key Functions:
LB/kg, Zero, Net/Gross, Tare, Print Annunciators:
Gross, Net, kg, LB, center of zero, stable, tare, negative Serial Port:
Full duplex RS-232 format Power Requirements:
12 VDC, 650 mA Wall Adapter, included Power Consumption:
80 mA + 3OmA/35O-ohm load cell Operating Temperature:
10° C to 40° C (-14° F to 104° F) Indicator Dimensions:
9.0" x 5.5" x 2.9" (229 mm x 140 mm x 73mm) Warranty:
1 year limited warranty applies NIST Classification:
H-44 Class III at 5,000 divisions
C.O.C. # 95-006 |
