The Dillon FI-90 Force Indicator is front panel configurable for capacity values from 1 to 400,000 lb or 200,000 kg, with a maximum resolution of 10,000 divisions. All the indicator functions are on the front panel. Operators select pounds, newtons, or kilograms by toggling a single key. The FI-90 is a peak hold indicator; a single key toggles the display between gross and peak mode. Features:- Front-panel configuration - Make easy configuration choices without opening the unit and hunting for the right dip switch. Calibrate and adjust linearity from the front panel.
- Convenient size - Approximately 2-7/8 inches high, 8-1/3 inches wide and 9 inches deep, the FI-90 Force Indicator fits easily on any table top or mounts on a vertical surface using the optional panel-mount kit.
- Gross / peak key - Switches instantly between gross and peak-hold modes. Peak-hold mode saves and displays the highest displayed reading.
- Three units of measure - User selects pounds, kilograms or newtons with a touch of the UNITS key.
- Battery backup - Information is stored and saved in memory in case of power failure.
Specifications:- Enclosure: Impact-resistant, ABS plastic; RFI coating 2.875" high x 8.36" wide x 9.11" deep (7.3 cm x 21.1 cm x 23.1 cm)
- Display: 7-segment LCD; 6-1/2 digits plus sign, .5" (1.3 cm) high; moveable decimal
- Control keys: ZERO/CLEAR, GROSS/PEAK, UNITS, PRINT, MENU, SELECT
- Annunciators: Center-of-zero, gross, peak, lb, kg, newtons, and battery
- Analog to digital conversion rate: 60 times per second
- Peak detection rate: 60 times per second
- Display update rate: 2 times per second
- Resolution: Up to 10,000 divisions, standard
- Increments: 1, 2, 5, 10, 20, 50 or any submultiple to .0001
- Capacity: Front-panel configurable for values from 1 to 400,000 lb or 200,000 kg
- Span range: .2 to 3.5 mV/V
- Zero range: ±0.2 mV/V (zero information stored in memory)
- Load cell excitation: 5 VDC, drives up to four 350-ohm load cells
- Cable connection: Standard 7-pin
- Power: 117 VAC +10 / -15%, 50/60 Hz, 5 watts max. Optional 230 VAC +10/-15%, 50/60 Hz, 5 watts max. Optional 12 VDC (10 - 14 VDC)
- Battery operation: Internal 1.3AH rechargeable battery.
- Continuous operation: one 350-ohm load cell, 32 hrs--four 350-ohm load cells, 15 hrs
- Alkaline battery operation: Four internal D-cell alkaline batteries.
- Continuous operation: one 350-ohm load cell, 200 hrs four 350-ohm load cells, 100 hrs
- Operating temperature: 14° to 104° F (-10° to 40°C )
- Warranty: One year
|