Intercomp CS5000 Crane Scales

Has edge radio telemetry for fast weight readouts at remote locations (operating range up to 450 feet/150 meters). Transceiver is FCC-approved. Intercomp's advanced design makes this remarkable crane scale first choice over other electronic units. It's value packed with the industry's most wanted features. Our ultra-high resolution, 20-bit A/D converter, plus 16-bit microcontroller, provides highest accuracy available — ±0.1% of applied load.

All crane unit electronics are shock mounted in a weatherproof cast aluminum case. This assures maximum protection against moisture, dust, and rough usage. Stainless steel indicator unit houses high visibility 0.8 inch/20 mm LED digital readout, which provides easy reading of weights, large push button switches allow simple, trouble-free operation.

Crane unit is powered by 8 "D" cell batteries. Efficient microcontroller gives up to 100 hours of battery life. Indicator unit operates on AC power or optional batteries. All units carry a full one-year parts and labor warranty. For all your overhead industrial weighing needs, look to Intercomp every time.

Features:

• Ideal for any overhead or below the hook application
• Telemetry equipped for wireless communication
• Capacities range from 500/250 to 500,000 lbs/225,000 kg
• Deluxe swivel hook with thrust bearing
• 20 bit A/D converter provides highest accuracy ±0.1%
• Multiple Crane Heads Into One Base Unit - Optional

Specifications:

• General: Zero, On, Off, Total, Display Total, Clear Total,
• Tare Set, Tare Display, Tare Clear, Print
• Display: 0.8 inch/20 mm high - 5 1/2 digit light emitting diode (LED)
• Indicators: Motion, Total, Low Battery, Gross, net and Tare
     
  Resolution: 20 bit A/D delivers over 1,000,000 internal counts
• Filtering: 6 pole, 10 hertz low pass
• Auto Shut-Off: Low battery, or after 5 minutes without use
• Auto-Zero: Satisfies all NIST/OIML requirements
• Zero: Up to 100% excluding NIST/OIML units
• Tare: Up to 100% of capacity
• Output: RS232/20 mA
• Indicator Unit: Two Channels - 14 Volt AC or DC, 110/220 VAC with Power Pack(Included)
• Optional 8 x "D" size disposable alkaline dry cells or rechargeable nickel-cadmium cells (Not included)
• Crane Unit: Optional 8 x "D" size disposable alkaline dry cells or rechargeable nickel-cadmium cells (Not included)
     
  Speed: 3 seconds to typical reading
• Accuracy: ±0.1% of reading
     
  Humidity: 10 to 95% non-condensing
• Temperature: Operating -20°C to +60°C/-4°F to +140°F
     
  Nominal Overload: 200% of capacity
• Maximum Overload: 500% of capacity
• Dimensions: Indicator unit - 10.5" x 13.5" x 7" / 227 mm x 343 mm x 178 mm
• Enclosure: Indicator unit - NEMA IV cast stainless steel housing
• Crane unit - NEMA IV cast aluminum case
• Weight: Indicator unit - 21.6 lb./9.8 kg
• Hook, Eye, Shackles: Crosby - Laughlin or equivalent
• Options:
• Substitute shackle for bottom swivel hook
• Multiple crane heads into one indicator unit
• Oversize top eye or shackle
• Anti-heat shield
• Remote load cell input and summing
• Battery power for indicator unit with 120/220 VAC power pack
• Direct Power for Crane Head 120/220 Volt
• Battery Charger for Crane Head 120/220 Volt
• NIST/OIML approval pending