Fuller Weighing 27S Semi-Automatic, Subsurface Palletized Filler

Control Power:

120 volts ± 10%, 60 Hz at 3 amps

Pneumatic Requirements:

Pressure - 90-125 PSIG filtered (6-8.5 Bars)
Demand - 16.4 SCFM (464 cubic liters per minute)
Usage/Cycle - 3.0 standard cubic feet (85 cubic liters)

Fill Time:

60 seconds per 55 gallon drum (208L)

Product Delivery:

110 GPM at 20 PSIG min. with 2" NPT connection (416 liters per minute at 1.3 Bars)

Weighing Accuracy:

± 3 increments on a 3 sigma basis

Operating Temperature:

32° F - 104° F (O° C - 40° C) at 95% relative humidity

Scale Base:

Size - 48" x 48" (121 cm x 121 cm)
Gross capacity - 5,000 lb (2,268 kg)

• Mild Steel blue painted frame

• Teflon seats and seals

• Mild steel scale base with stainless steel load cells

• 1.9" O.D. (48mm) 316 stainless steel lance, product valve and piping

• Teflon encapsulated Viton O-Ring

• 2" NPT female inlet connection

• X-Y lance carriage to reach four drums on a pallet

• Lance actuated drip pan

• Special diameter lance

• Kynar lance assembly

• Multiple sized containers

• Sanitary lance - 316 stainless steel with quick disconnect (USDA approved)

• Gray, sanitary white or chemical resistant beige epoxy paint

• Pneumatically powered scale, indexing or exit conveyors

• 48" x 48" (121 cm x 121m) gravity scale conveyor, 8" (20 cm) floor to top of rollers (conveying surface: 43" W x 48" L)

• Purged lance assembly

• Fume exhaust hood

• Stainless steel scale base

• Stainless steel scale cover to slip over mild steel base

• Constant voltage transformer

• 80 column dot matric report printer

• X-purged NEMA-4 mild steel enclosure, 30" H x 24" W x 12" D with intrinsically safe barrier strip

• NEMA-4 stainless steel enclosure