| If you need to move your weigh in motion system
around, this is the type of system for you. Massload provides an excellent
portable solution for weigh in motion.
Weighpads
The weight sensors we suggest for a portable system are our
very successful line of Ultra Slim Weighpads. Lightweight, robust, and low
profile, these pads can be laid on any flat, hard, and level surface, connected
to the computer, and within minutes, your system is ready to go.
Leveling Track
For best accuracy, it is recommended that the vehicle is level with the weighpad.
For this, we offer interlocking leveling track. The length of track is dependent
on the length of vehicle you are weighing. The vehicle should be completely on
the leveling track before any axle crosses the weighpads, and should remain on
the leveling track until all axles have passed over the weighpads.
This track comes in compact and lightweight 36" x 24" (20lbs
/ piece) pieces. Handles are machined into the pad that make it easy to carry
and assemble.
The roll up leveling mats makes moving and setting
up as easy as 1-2-3.
Designed to work with Ultraslim Weigh pads
Great for portable weighing in motion and static
applications
Cables
Cabling for a portable system consists of 1 Y-cable. There
is an industry standard, water tight amphenol connector on each of the Y - ends
that connect to the weighpads. On the other end is a 9 pin D connector that
connects to the weigh in motion interface card. The length of cable can be up to
300 feet.
Direct interface from Weighing in Motion scale to usb port
of computer
Features:
- Samples sensor at 16,000 times a second - competition
samples at 550 per second
- If used in static weighing application (.002%
resolution )
- Unlimited linearity adjustment
- No external power supply needed
Fully rated
- USB 1.1 computer interface - use weigh in motion
software with your laptop!
- Forget the full sized desktop.
16 bit resolution
Connect up to 8 devices to one computer
- Can power twelve 300 ohm load cells
- Backwards compatible with LCIC card
- Small, standalone package, easy to wire to any scale
- Calibration is stored on the device, not the computer, just
plug it in and go
- Easy to use, windows based calibration utility and library.
Drivers for Win98, 2000, XP, Linux and OS X
Optional Components
- 12VDC to 110VAC inverter to use power from a cigarette
car lighter.
- Custom made carrying cases to keep all your weigh in
motion components together and safe.
- Printers
- Wireless networking components.
 |
