The TI-1500 Series Digital Indicator is a general purpose,
industrial grade weight indicator featuring piece counting operation and a
custom unit. Four models are currently available, distinguishable by display
type and enclosure type. All models operate identically, can readout up to
50,000 display divisions and can supply enough current for up to 8-350 ohm
loadcells. All setup parameters may be entered via the front panel key,
including calibration.
Analog Specifications:
- Full scale input signal - 30mV, including dead
load
- Minimum Sensitivity (non H-44) - 0.4 micro volts
/ grad
- Minimum Sensitivity (H-44) - 1.0 micro volts /
grad
- Input impedence - 30M ohms typical
- Internal Resolution - approx 260,000 counts
- Display resolution - 50,000 display divisions max
- Measurement Rate - 10 measurements/second nominal
- System Linearity - within 0.02% FS
- Calibration Method - Software calibration stored
in long term EEPROM
- Excitation Voltage - +10VDC, 8 x 350 ohm
loadcells
- Communication - RS-232 serial port, Full duplex
- Operating temperature range - -10degC to +40degC
- Overall dimensions - 12" x 8" x 4"
- Standard AC Input - 110/220 VAC, 50/60Hz
- Optional AC Adapter - 12 VDC @ 800mA
- DC Power consumption - 200mA + 30mA/350 ohm
loadcell
Approvals:
NTEP - Class III/IIIL COC 99-017
Canadian Legal Branch of Metrology - Class III Approval No.
European CE Mark - Meets test requirements for: EN55011 for class B ISM;
EN50082-1 for residential, commercial, and light industrial
Software:
*Massload has developed optional software to work with this indicator. Connect this indicator to your computer and save your data. Ask us about this software. |
