The mild steel ILS frame is an integrated assembly incorporating two supporting conveyor legs, with two analog load cells, a junction box and cabling. Installation: Bolt-on ILS frames replace existing conveyor legs. Junction boxes include pre-wired input and output cables for fast setup. Typically, two frames are required per conveyor. For static applications that require the use of two conveyor sections to create a longer weighing platform, a third frames is installed where the sectins are joined together. Features:- Bolt-on - ILS components quickly and economically.
- Transform a conventional conveyor section into a full-featured static electronic scale.
- Gain scale functionality from the same physical conveyor footprint.
- New - Conveyor installations.
- Retrofit Kits - for existing conveyors.
- Separate Components - for custom system design.
- Increase Productivity- Save steps with inline weight measurement and checkweighing.
Specifications:- Capacities: 440 lb per ILS frame. Total scale capacity is double the indiviudal frame rating. When selecting a capacity, the weight of the conveyor section must be factored in.
- Widths – 24, 30 and 36 inches
- Adjustable leg height – 23-5/8†to 35-5/8â€
- Finish: Heat-fused powder paint provides a high level of corrosion protection.
- Sizes: Widths – 24, 30 and 36 inches, Lengths – 5 or 10 feet
- Rollers: Placed on 3†centers for even load support and “set high†for unobstructed conveyance. 1.9†diameter, 16 ga. mild steel.
- Load Rating: 5’ length – up to 600 lbs per foot, 10’ length – up to 135 lbs per foot
- Weighing Accuracy: 0.1% for static conveyors (applied load)
|