| Factory Ex stainless steel terminal, designed for use in a Zone 1 hazardous area with a built-in A/D converter (max. 60,000 digits, not for use in legal metrology). The backlit graphical display ensures excellent readability and a high degree of operator convenience. Various applications can be programmed in the scale’s menu, such as checkweighing, net-total formulation, product data memory, printouts, timer function, etc.).A/D converter. This scale can be connected to all conventional strain-gauge scales and analog platforms of the IF Series (flat-bed scales), IU Series (pallet scales) as well as all Combics-EX Platforms (with own EX-approval). Pursuant to Number 5.4 of EN 50020/1994, this simple electrical equipment does not need certification or special marking if they fulfill the technical specifications. They are standard equipped with an RS-232 data interface (or optionally an RS-485. The various installation options (bench mounted, floor stand, wall mounted, built into a control panel) are available. All cables are equipped with cable glands or threaded round connectors for networking. The version FCT01-XV1 is certified with load cells PR62... . All Sartorius Ex-products have additional to an ATEX-approval a verification of intrinsic safety (for the explosion protection document) Factory Ex Stainless Steel Terminal, FCT01-X/FCT01-XV1, with Built-in A/D Convertor Performance Specifications of the A/D Converter | Weighing Capacity | up to 120 t (max. 60,000 digits, not for use in legal metrology) | | Accuracy Class | II, III | | Number of Verification Scale Intervals | 1x6000e
2x3000e
1x3000e | | Bridge Impedance | 83 ohms minimum (FCT01-XV1: 140 ohms minimum)
2,000 ohms maximum (FCT01-XV1: 2,000 ohms maximum) | | Sensor Technology | 6-conductor technology
4-conductor technology | | Input Voltage | 0.05 mV/V minimum
3.6 mV/V maximum | | Bridge Supply Voltage | Amplitude 5.2 V dc
Constant voltage (± 2.6V dc) | | Analog Signal Input Variation | 0.5 mV/V minimum
3.3 mV/V maximum | | Partial Error of the Electronics | pi=0.5 6,250e
pi=0.3 3,750e | | Dead Weight | Maximum for dead weight 0.7 mV/V
Minimum for dead weight 0.05 mV/V | | Temperature Range | 0 °C... + 40 °C | | Cable can be Connected to Load Receptor | 8x 0.5 mm2 : Length ≤150 m, model LiYCY
(resistance over the entire length of one wire: <13 ohms)
Braided: round copper wire, tin-plated, 80% sheathed |
Technical Specifications of the FCT01-X Terminal | Approved for EU countries including the UK | EEx ib IIC T4 II 2 G | Approval for USA (FM)
Canada (CSA) | IS CL I, II, III, DIV1, GP A, B, C, D, E, F, G T4
CL I DIV1GP A, B, C, D T4 | | IP protection rating | IP65 | | Housing | Tilted design
Footprint 87x268 mm
Front 268x144 mm
Stainless steel, AISI 304 | | Power supply | Via separate power supply (choice of power supply either for use within or outside a hazardous area) YPS02-… (see Accessories for “Modular” Factory scales) | | Data transfer from hazardous areas | Via Zener barrier YDI … (see Accessories for “Modular” Factory scales) |
The power supply must always be ordered separately depending on the area of use and the country.
|
