At last, here's the scale system that race car owners have been asking for. Intercomp's unique SWâ„¢ design provides all the flexibility that's needed to fine tune car weight and balance to varying track conditions. Features:- Fine tune vehicle weight and balance/center of gravity calculation
- Jumbo size - 4 row supertwist LCD display
- Capacities: 6,000 lb/2800 kg or 8,800 lb/4000 kg per system
- Fourteen display modes of weights and percentages
- Storage registers/printer/RS232 output
- Top repeatability- consistently repeats same wheel weight.
- Jumbo built-in memory- holds up to 100 complete set-ups-including track name and car number!
- Permits "fine tuning" of vehicle weights and balance to get optimal weight distribution.
- Built-in self-diagnostics to check memory, display, keypad, weighing channels, power supply and weigh pads.
- Calibration- allows on-site user calibration.
- Shows weights in pounds or kilograms.
- Push button zero.
- High accuracy in two models: 1/10 of 1% (2.5 times greater than other makes) or 1/4 of 1%.
- Two weight capacities: (1) 6000 lb/2800 kg (1500 lb/700 kg per pad); (2) 8880 lb/4000 kg (2200 lb/1000 kg per pad)
- Power: 120-volt AC external 12-volt AC/DC and internal, C-size nickel cadmium rechargeable or alkaline batteries.
- Automatic turn-off to extend battery life.
- Low battery indicator- tells user when batteries need recharging.
- Internal memory recalls data of last vehicle weighed when unit is turned on.
- Convenient size pads: 15" x 15" each to accept a wide range of wheel sizes.
- Push Button night light.
- Rugged, protective water-proof carrying case for control box.
- Each system consists of 4 weigh pads, cables, control box (with case), battery recharger and instruction manual.
- RFI/EMI protection
Options:- Built-in printer to give permanent hard-copy of time and date, wheel weights, percentages, track name and car number.
- Serial RS232 output.
- 220 volts/50 hz power.
- Up and down ramps for easy positioning of vehicle on weigh pads.
- Carrying case for weigh pads, ramps, cables and control box case.
Controls:- General: Zero, lb/kg, Test, Light, Print, Help, Set Time/Date, On, Off.
- Numeric: 13-key standard layout.
- Channel Selection: LF, RF, LR, RR, ALL.
- Weight and Percent: 8-key Weight and Percent selection.
- Storage Registers: Two-key register and I.D. Selection
- Indicators: lb/kg, Lo Bat.
Outputs/Inputs:- Outputs: RS232 Serial
- Inputs: 4 Analog Channels
Filtering:- Analog: Trans-besel filter.
- Digital: Average of several internal weights gives steady readings for unstable load.
- Auto-Zero: Satisfies all HB-44 requirements.
Performance:- Speed: 950 milliseconds to typical reading (static). Accuracy: ±1% of reading static mode.
- Accuracy: ±0.1%
- Calibration: Keypad calibration
- Units: Lb, kg selectable
Electrical:- Voltage: 12 VAC/VDC, 120/240 VAC.
- Batteries: 9 "C" size rechargeable Ni-cads, or alkaline
Ambient:- Humidity: 10 to 95% non-condensing.
- Temperature: Operating 0°C to 50°C | 32°F to 122°F; Storage -40°C to 75°C | -40°C to 170°F
Carrying Case/Control Box:- Physical: Overall dimensions 17"L x 11"W x 7"H
- Weight: 10 lb/4.5 kg
- Material: ABS structural foam
Ramp:- Physical: Overall dimensions 15.25"L x 15.25"W x 4"H.
- Weight: 4.8 lb/2.2 kg
- Material: High strength aluminum alloy
|
