Dillon AP Mechanical Crane Scales are available in capacities from 500 to 50,000 lb and 200 to 20,000 kg. Every detail of their construction was chosen for long life. Uncomplicated operation includes tare function and maximum peak load indication. Features:- Available in low, intermediate and high rangemodels – Thirteen capacities from 500 to 50,000 pounds. Nine capacities from 200 to 20,000 kg.
- Anti-parallax dial and pointer – Easy to read even at an angle.
- Tare capability – Tare loads up to 20% of capacity can be zeroed out by means of zero control.
- Dust protection – Pinion gear, sector gear and shafts are mounted in precision aircraft bearings, permanently sealed against dust and dirt. Oiling is never required.
- Tough construction – Mechanism case is a heavy aluminum alloy casting, tough enough to resist even heavy blows.
- Ingenious design – Utilizes a specially designed alloy steel beam that translates force to pounds. Full scale reading results from beam deflection of only 0.026". Applied loads are indicated instantly.
- Reduced wear – Pinion and sector gears are cut from stainless steel and hardened aluminum. Use of these
dissimilar materials greatly reduces friction and wear. - Protective finish – Scale cases are coated with a baked-on powder paint process making them resistant to chips, scratches, rust and corrosion.
- Maximum indicator – Remains in position to indicate peak load point after load is removed from scale.
Specifications:- Accuracy: To ±0.5% of full scale
- Tare adjustment: Up to 20% of full scale range
- Ultimate safety factor: 5:1 (* 4:1 for 20,000 lb, 50,000 lb, 10000 kg and 20000 kg)
- Dial diameter: 10"
- Scale length
- Low Range: 251/2"
- Intermediate Range: 293/4"
- High Range: 371/2"
|
