Manufacturers
Categories
Services
Company Information

Sartorius FCT01-X Indicator

Model: FCT01-X

Speak to a Scale Specialist!
Call (800) 526-0070
- = OR = -
Email us: sales@dynamicscales.com


Where are the prices?
Click here for details.

 
   
Manufactured by: Sartorius
  Contact Us
Factory Ex stainless steel terminal, designed for use in a Zone 1 hazardous area with a built-in A/D converter (max. 60,000 digits, not for use in legal metrology). The backlit graphical display ensures excellent readability and a high degree of operator convenience. Various applications can be programmed in the scale’s menu, such as checkweighing, net-total formulation, product data memory, printouts, timer function, etc.).
  • A/D converter. This scale can be connected to all conventional strain-gauge scales and analog platforms of the IF Series (flat-bed scales), IU Series (pallet scales) as well as all Combics-EX Platforms (with own EX-approval). Pursuant to Number 5.4 of EN 50020/1994, this simple electrical equipment does not need certification or special marking if they fulfill the technical specifications.
  • They are standard equipped with an RS-232 data interface (or optionally an RS-485.
  • The various installation options (bench mounted, floor stand, wall mounted, built into a control panel) are available.
  • All cables are equipped with cable glands or threaded round connectors for networking.
  • The version FCT01-XV1 is certified with load cells PR62... .
  • All Sartorius Ex-products have additional to an ATEX-approval a verification of intrinsic safety (for the explosion protection document)

    Factory Ex Stainless Steel Terminal, FCT01-X/FCT01-XV1, with Built-in A/D Convertor

    Performance Specifications of the A/D Converter

    Weighing Capacity    up to 120 t (max. 60,000 digits, not for use in legal metrology)
    Accuracy Class    II, III
    Number of Verification Scale Intervals    1x6000e
    2x3000e
    1x3000e
    Bridge Impedance    83 ohms minimum (FCT01-XV1: 140 ohms minimum)
    2,000 ohms maximum (FCT01-XV1: 2,000 ohms maximum)
    Sensor Technology   

    6-conductor technology
    4-conductor technology

    Input Voltage   

    0.05 mV/V minimum
    3.6 mV/V maximum

    Bridge Supply Voltage   Amplitude 5.2 V dc
    Constant voltage (± 2.6V dc)
    Analog Signal Input Variation    0.5 mV/V minimum
    3.3 mV/V maximum
    Partial Error of the Electronics    pi=0.5 6,250e
    pi=0.3 3,750e
    Dead Weight    Maximum for dead weight 0.7 mV/V
    Minimum for dead weight 0.05 mV/V
    Temperature Range    0 °C... + 40 °C
    Cable can be Connected to Load   Receptor    8x 0.5 mm2 : Length ≤150 m, model LiYCY
    (resistance over the entire length of one wire: <13 ohms)
    Braided: round copper wire, tin-plated, 80% sheathed

    Technical Specifications of the FCT01-X Terminal

    Approved for EU   countries  including the   UK    EEx ib IIC T4 II 2 G
    Approval for USA (FM)   
    Canada (CSA)   
    IS CL I, II, III, DIV1, GP A, B, C, D, E, F, G T4
    CL I DIV1GP A, B, C, D T4
    IP protection rating    IP65
    Housing   

    Tilted design
    Footprint 87x268 mm
    Front 268x144 mm
    Stainless steel, AISI 304

    Power supply    Via separate power supply (choice of power supply either for use within or outside a hazardous area) YPS02-… (see Accessories for “Modular” Factory scales)
    Data transfer from   hazardous areas    Via Zener barrier YDI … (see Accessories for “Modular” Factory scales)

    The power supply must always be ordered separately depending on the area of use and the country.
     

  •  
     
     
    This product was added to our catalog on Saturday 19 November, 2005.
    Home | Refresh | Site Map 
    Dynamic Scales, Inc.
    1466 South 8th Street
    Terre Haute, IN 47802
    sales@dynamicscales.com

    Fanatical Customer Service and Great Prices!
    Call us today to find the scale you need!

    Call Toll-Free (800) 526-0070
    Tel: (812) 234-3111
    Fax: (812) 234-4222

    Web Development by:
    XCaliber Systems

    Copyright 2002-07
    Dynamic Scales, Inc.
    All rights reserved.
    Your IP Address is: 52.91.0.68

    Powered by ZenCart