Low cost, power efficient indicator incorporates the most sophisticated A/D and CMOS technology available today.
- 20 Bit A/D ConverterÂ
- Jumbo Size 1 in./25 mm LCD Display (LED Optional)Â
- Gross/Net/TareÂ
- Compact DesignÂ
- Alkaline or Ni-Cad Battery PoweredÂ
- Low Power CMOS DesignÂ
- RS232 OutputÂ
- Full Keypad Setup and CalibrationÂ
- Proven Design and ReliabilityÂ
- Competively Priced
| General | | Capacity: | Up to 99999 lb/99999 kg | | Graduation: | By .02, .05, .1, .2, .5, 1, 2, 5, 10, 20, 50, or 100 lb/ .01, .02, .05, .1, .2, .5, 1, 2, 5, 10, 20, 50 kg | | Display Resolution: | 10,000 displayed graduations, 100,000 internal graduations | | Electrical | | Load Cell Excitation: | 5 VDC | | Load Cells: | Up to 4 at 350 Ohms | | Analog Signal Input: | 1mV/V to 3mV/V | | Analog Signal Sensitivity: | 0.3 microvolts/graduation | | Update Rate: | 10 updates/second, no averaging | | Battery Life: | (Dependant on use of back light)
Up to 150 hours with fully charged nickel-cadmium
 (1 x 1000 Ohm load cell)
Up to 50 hours with fully charged nickel-cadmium
 (4 x 350 Ohm load cell)
Up to 400 hours with alkaline
 (1 x 1000 Ohm load cell)
Up to 125 hours with alkaline
 (4 x 350 Ohm load cells) | | Batteries: | 6 x D-size alkaline cells (Not included) | (The Following specs are for nickel-cadmium battery power option only) | | Batteries: | 6 x D-size nickel-cadmium cells (Not included) | | Charge Time: | 16 hours | | Charger Voltage: | 12 to 20 VDC | | Charger: | Charger/Power transformer - 110/120 VAC | | Charger Current: | 440 mA | | Low Battery Shut-Off: | Unit automatically shuts off if batteries are low | | Auto Shut-Off: | Shuts off after up to 5 minutes of non-use (Variable up to 30 minutes) | | Display: | 1 inch/25mm high - 5 digit liquid crystal display (LCD) (LED optional) | | Backlight: | Automatic in low light or push button | | Indicators: | Three (lb, kg, Net) | | Control Switches: | Seven (On, Off, Zero, Print, Tare Set/Display, Tare Clear, lb/kg) | | Output: | RS232 serial output | | Features: | Push button Tare up to 100% of capacity
Push button Zero up to 100% of capacity excluding NIST/OIML units
Push button lb/kg unit switch
Push button print of Gross, Net and Tare
Displays Gross, Net, and Tare Weight
Adjustable baud rates from 75 to 9600
Selectable AZT off, .6, 1, or 3 graduation
Set whether turn on is in lb. or kg
Adjustable display update/weight averaging | | Temperature: | Operating -10° to 40°C/14° to 104°F | | Enclosure: | Extruded Aluminum
8.5 W x 4.5 H x 5 D inches/216 W x 114 H x 127 D mm | | Weight: | 4.5 lb/2 kg | | NIST Classification: | Class III/IIIL at 10,000 divisions | | Options: | LED display
Battery charger power pack 120/220 VAC |
|
