Company Information

Virtual Measurements Model VC-203 Series Standard Indicators

Model: VC-203

Speak to a Scale Specialist!
Call (800) 526-0070
- = OR = -
Email us:

Where are the prices?
Click here for details.

Manufactured by: Virtual Measurements
  Contact Us
  • 10,000 Display resolution (NTEP pending)
  • 10 Pre-defined Tare value
  • Selectable kg/lb/g/oz
  • Programmable as Main Indicator & Remote Display
  • Programmable custom print format
  • Configurable for Animal Weighing Application
  • Easy Panel Mount Design
  • Optional Re-Chargeable battery
  • Internal Resolution 1,000,000 counts at 3mV/V
  • Display Resolution  Selectable (1/10,000 NTEP approval pending)
  • Input Sensitivity 1uV/graduation minimum
  • Display Increments Selectable x1, x2, x5, x10, x20, x50, x100
  • Decimal Point Location Selectable 0 ~ 4
  • Display 7 Digits 7-Segment LED display, 14.2mm (0.56”) high, with annunciators (7 LED lamps) for function select, Stable, Center Zero, Net, Print, kg, lb, andLow Battery display
  • Keyboard 18 button (VC-202) or 6 button (VC-201) keypad with tactile keys(includes 1 button for Power On/Off)
  • Audio Alarm Tone for key entry confirmation and low battery alarm
  • A/D Conversion Rate 7.5 updates per second
  • Load Cell Excitation Voltage  9.8VDC or 5VDC selectable. Drive up to four 350 ohm load cells
  • Analog Input Range 0.2mV/V to 3.0 mV/V maximum
  • Non-Linearity 0.01% of full scale or less
  • Over Capacity Display “CAP OL” when exceeds the full Scale Capacity
  • Tare Full capacity, push button tare, numeric key tare.
  • Register and Recall 10 Pre-defined Tare valves
  • Auto Zero Tracking Selectable to 3.0 d by 0.5 d step
  • Motion Window Key-in data 0..255 (1 = 0.5 d)
  • Calibration Method Software – Menu driven prompting
  • Units of Measure Selectable kg/lb/g/oz, up to 2 units displayable
  • RFI/EMI Protection All signal and excitation lines filtered to –65db min. @ 500MHz
  • Filtering  Selectable digital filter
  • RS232C data output COM Port 1. Full Duplex or Bi-directional; COM Port 2. Simplex or Unidirectional (output only)
  • Selectable baud rates (1200,2400,4800,9600,19200), manual or auto print, continuous data out or bi-directional
  • Remote Display Programmable as Main Indicator and Remote Display
  • Custom Print Format Programmable, up to 119 characters for Custom Print Format and up to 23 characters for
    Continuous Print Format
  • Set Points Selectable up to 2 Set Points for Low and High limit settings
  • Power 100/115VAC or 220/230VAC, 50-60Hz, 6VA with built-in Charger for 12 VDC 2-2.3AH Rechargeable Sealed Lead  Acid Battery(Battery Dimension 67 (H) x 178 (W) x 34 (D) mm, is optional)
  • Current Consumption 100mA + 30mA per 350 ohm load cell
  • Operating Temperature -10 degrees C to + 40 degrees C
  • Relative Humidity Maximum 90% RH, Non-condensing
  • Dimensions 150 (6”)H x 230 (9.1”)W x 100 (4”)D mm – VC-202; 140 (5.5”)H x 230 (9.1”)W x 90 (3.5”)D mm – VC-203
  • Shipping weight 1.2kg (2.3kg with optional battery) – VC-202; 2.1kg (3.2kg with optional battery) – VC-203
  • Enclosure VC-202 ABS Plastic Casing, VC-203 Stainless Steel Casing
  • Warranty One Year Limited Warranty
This product was added to our catalog on Saturday 12 August, 2006.
Home | Refresh | Site Map 
Dynamic Scales, Inc.
1466 South 8th Street
Terre Haute, IN 47802

Fanatical Customer Service and Great Prices!
Call us today to find the scale you need!

Call Toll-Free (800) 526-0070
Tel: (812) 234-3111
Fax: (812) 234-4222

Web Development by:
XCaliber Systems

Copyright 2002-07
Dynamic Scales, Inc.
All rights reserved.
Your IP Address is:

Powered by ZenCart