Cambridge Models SSCSW-10 & SSCSW-10-B Digital Weight Indicators

Features:

• Stainless Steel NEMA 4X Enclosure with Stainless Steel Swivel Stand
• Selectable Non-NTEP/NTEP Operation (Approval Pending)
• Net/Gross Display Modes
• Full Range Auto Tare
• Adjustable Sample Rate
• Digital Filtering
• All Pushbutton Controls
• LED Display (Bright)
• Printer Data Output on Demand
• Clearly, Visible Center of Zero
• Indication on Display
• Lb/Kg Conversion

Applications:

• Floor Scales
• Bench Scales
• Hopper Scales
• Tank Scales
• Fork Lift Scales
• General Purpose Weighing
• High Resolution Mode for Calibration Purposes
• Complete Digital Calibration
• Full Range Push Button Zero
• (1) RS-232 Port for Interface with:
• Printer Output of Gross/Tare/Net
• Computer Data Output
• Scoreboard Continuous Output Alphanumeric or Numeric
• Remote Receiver Output (RF Link)
• 120 VAC Cord with Ground
• Auto Zero Tracking
• Adjustable Motion Detection (Non-NTEP only)

Model CSW-10-B:

• Battery Operation
• Battery Charger

Optional Features:

• 6 Pin Water Tight Connector
• Net Weight Totalization
• 12 VDC Accessory Port Power Cable
• Peak Weight Hold
• Digital Scroll Tare
• RFL-Radio Frequency Link

Specifications:

• Power (SSCSW-10) - 120 VAC Cord with Ground
• Power (SSCSW-10-B) - 7.4 VDC 2600 mAH
• Humidity - 0-90% Non-condensing
• Enclosure - 304 Stainless Steel NEMA 4x
• Dimensions - 7.5" x 4.5" x 3" without Stand, +1" with Stand
• Resolution - NTEP: 5,000 Division, NON-NTEP: 20,000 Division
• Display - High Efficient, Bright LED - 6 Digits - .56" High
• Input - 0 - 15mV
• Temperature - -10º to 40ºC
• Linearity - 0.001% of Full Scale
• Accuracy - 0.001% of Full Scale
• Load Cell Supply - 5 VDC at 150mA (8 each 350 ohm load cells)