Manufacturers
Categories
Services
Company Information

Salter Brecknell 7820B Portable Bench Scales

Model: 7820B

Speak to a Scale Specialist!
Call (800) 526-0070
- = OR = -
Email us: sales@dynamicscales.com


Where are the prices?
Click here for details.

 
   
Manufactured by: Salter Brecknell
  Contact Us
Features:
  • Construction – Stainless steel weight platter. Die cast aluminum base and load bridge.  Aluminum handle.
  • Remote Display – 6-digit backlit display housed in an extruded enclosure with a 1.5" cable assembly with RJ45 connector. Includes 6" magnetic strip.
  • Remote Display Enunciators – Zero – Indicates the scale is at zero weight. Hold – Indicates the weight hold feature is active. AC Power – Indicates AC Power is connected to the scale and charging the battery
  • Remote Display Controls – Zero Key – Includes 2% Auto Zero tracking or manual push button to reestablish zero reference. Turns the scale OFF, when operated via battery.
  • Hold Key – Enables or disables weight hold feature. Enters into backlit and weight hold setting configuration.
  • Weigh Hold Settings – Single – Allows you to hold the parcel weight on the display for one parcel Auto – Allows you to hold the parcel weight on the display for unlimited parcels. Sealed – Some states may not accept weight hold in NTEP approved applications. The sealed mode disables the weight feature.
  • Backlit Settings – Auto – Back light turns off after 5 seconds of non use. On – Back light is always on. Off – Back light is always off.
  • Battery Conservation – Sleep – After 5 minutes of non-use the scale will enter into sleep mode. Pressing the zero key will re-activate the scale Auto Shutdown – After 1 hour of non use the scale will shutdown. Pressing the restart button will re-start the scale.
  • Restart Button – While in battery operation mode, the restart button (located on the rear of the scale) turns on the scale.
  • Hard Wired Battery Cable – Battery cable is hard wired to main PCB, no external connections.
  • Battery Life – Stored, no use - 14 days. Back light Off - 40 hours. Back light On - 12 hours. Back light Auto - 24 hours. Re-charge time - 8 hours. Re-charge cycles - 400 minimum
  • RS-232 Interface – 9 pin using Standard NCI protocol
  • Field Calibration – Alternate span points, 10 or 50 lbs, can simplify field calibration. Can be set up either in decimal pounds or kilogram.
Specifications:
  • Capacity: 200 x 0.05 lb
  • Internal Resolution – 1 part in 120,000
  • Dimensions – 12" x 19.5" x 4.6" (318 mm x 495 mm x 117 mm) standard configuration 12" x 14" x 4.1" (318 mm x 358 mm x 104 mm), no handle
  • AC Power – Inline Transformer, UL/CSA Approved – Input: 120 VAC (+10%-15%), 60Hz standard 3-wire ground Output: 14 VDC (min) @ 730 mA DC - 12 VDC/1.3AH Sealed lead acid battery
  • Operating Environment – Temperature: 42 degree F to 104 degree F (5 degree C to 40 degree C) Relative Humidity: 10 to 95% (non-condensing)
  • Agency Approvals – United States: NTEP #95-070 For use as a Class lll device
  • Input/Output – RS-232, bi-directional, configurable 1200-19.2K. Transmits weight and scale status whenever a "W" is sent by remote device.
  • Scale Weight – 16 lbs, standard configuration
  • Shipping Weight – 24 lbs, standard configuration
 
 
 
This product was added to our catalog on Friday 11 August, 2006.
Home | Refresh | Site Map 
Dynamic Scales, Inc.
1466 South 8th Street
Terre Haute, IN 47802
sales@dynamicscales.com

Fanatical Customer Service and Great Prices!
Call us today to find the scale you need!

Call Toll-Free (800) 526-0070
Tel: (812) 234-3111
Fax: (812) 234-4222

Web Development by:
XCaliber Systems

Copyright © 2002-07
Dynamic Scales, Inc.
All rights reserved.
Your IP Address is: 3.90.187.11

Powered by ZenCart